AWN-01 · HDGL / 0A4G Hybrid Simulator

Recursive topology · phase organization · electrical firing gate · explicit unknowns

HYBRID / RC GATE RUNNING

Topology / operator

β binding

Base rung frequency (Hz)

Phase modulation depth m 0.15

Interstage phase kick (rad) 0.28

Pre-lock detuning 2.0%

Electrical envelope (model inputs)

HV rail (V)

Electrical reset / extinction target (V)

RCA distinction: approximately 70 V is the conducting anode drop; the RCA manual says DC operation must pull the anode below 60 V to extinguish. Default reset = 55 V. The 70 V Post-32 phase baseline remains a separate reference.

Firing voltage (V) 130

Charging resistance (kΩ)

Starter bias (V) 60

Starter pulse peak (V) 25

Starter pulse width (ms) 5

Ionization / transfer window (ms) 5

Starter-current test input (µA) 100

Starter breakdown threshold (V)

Starter-current documentation has context-dependent figures: the tube sheet specifies ≤100 µA for transition at 140 V peak, while the RCA application manual describes ≥200 µA as desirable in its relay application. This control exposes the conflict; it does not resolve it by assumption.

Model switches

Firing authority

Starter trigger source

Discharge reset model

Run speed

Safety / scope: Software model only. 190 V DC can be lethal. This page is not a build instruction or a validated tube model. The discharge is presently an idealized reset because the actual tube current waveform, holding behavior, and discharge-path impedance are not established by the supplied sources.

Circle shift ΔΛ—

Mean |L|—

S0 measured rate—

Mean interspike CV—

Accepted / rejected0 / 0

Seven rung states · capacitor voltage (solid) and HDGL phase reference (dashed)

Starter-anode voltage / threshold

Interstage firing events

HDGL operator table and electrical timing audit

Rung	f target	x	β	Ω	δ	\|L\|	arg L°	C (µF)	RC period (s)	Measured Hz	CV	Fires	Rejected

Event log ready.